Oemselogout - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands
Common Error Messages
Setting ETO failed,
The BladeEngine iSCSI initiator TCP/IP settings are not configured. Please configure the
TCP/IP settings before issuing this command.,
Error

5.25. OEMSELogout

Command
OEMSELogout
Description
This action sends a Logout request to this target. SM-CLP will not allow logout of
BootSessions.
Syntax
OEMSELogout [common_options] [-OEMSEparams] [InstanceNumber="< value >"] [SM-
CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
None
Optional Parameters
Parameter Data
Name Type
InstanceNumber string
Possible Error Messages
Common Error Messages
Min Max Default Description
This parameter accepts string input and converts it
to an equivalent number and uses that as an
0 63 0
instance number. Specify an asterisk '*' instead of
an instance number to indicate all instances.
5.25. OEMSELogout
55