Oemseaddisnsentry - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5.29. OEMSEAddiSNSEntry

Command
OEMSEAddiSNSEntry
Description
This command adds the given iSNS server to the BladeEngine controller. Specify the iSNS
server IP Address as the first required option and the port number as the second. This
command will return a successful message if communication with the specified iSNS server
is completed. If not successful, check your network configuration. Example:
OEMSEAddiSNSEntry -OEMSEparams IPAddress="172.40.2.1",PortNum="3205"
Syntax
OEMSEAddiSNSEntry [common_options] -OEMSEparams IPAddress="< value
>",PortNum="< value >" [SM-CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter Data
Name Type
IPAddress ipaddress
PortNum integer
Optional Parameters
None
Possible Error Messages
Common Error Messages
Invalid value,
Min Max Default
0 0 0.0.0.0
1024 65535 1024
5.29. OEMSEAddiSNSEntry
Description
The IP address of the server to be added into the
table. The iSNS server table will be used by the
firmware for discovering targets.
The Port number of the iSNS server.
59