Configuration Import - NEC Univerge SV9100 Installation Manual

Configuration Import

This step will program the SV9100 ready for MyCalls and download key data from the PBX ready to
send into MyCalls. After the license manager has been closed down click OK and the Configuration
Import Tool will be opened. MyCalls has a scheduled config import feature which means it will
synchronise data between MyCalls and the SV9100. The Configuration Import Tool can be started
manually at any point and is located in the Start / Programs / NEC Infrontia menu.
When prompted, enter the IP Address of the PBX and click download
If the SV9100 is not configured as required for MyCalls you will be asked if you would like MyCalls to
configure the SV9100 for you Click Yes to continue. You may be prompted to enter a user name and
password for the SV9100 if the defaults values have been changed. A list of the commands set by
MyCalls are available below, the settings changed are the same as what is set by the MyCalls v5
script.
If there is a value set by MyCalls that needs to be changed, this can be done using PC Pro / Web Pro
after MyCalls has set it. For example, all extensions are enabled for SMDR output, if there was a
requirement for a particular extension not to output SMDR this would manually need to be changed
back after MyCalls had enabled it.
12 | P a g e