Creating Users Using The Config Import Tool - NEC Univerge SV9100 Installation Manual

Users can be optionally assigned to extensions, this is beneficial for when users use the same
extension all of the time. To assign an extension to a user go to Configure / Telephone System / PBX
/ Devices / Extensions / Create or Edit Extensions. Click the select button next to the Default User
box.
Now select the user in the same method as when assigning the user to the PIN number and click OK
to save changes.

Creating Users Using The Config Import Tool

If there are numerous users to create, the Config Import Tool can be used to speed up the procedure.
When using the Config Import Tool to create users on an existing installation, you should be aware
that the config import tool will overwrite any existing configuration in MyCalls. After the config has
been read from the SV9100, if you didn't want to alter DDI's / Trunks etc, then these should be de-
selected before completing the config import.
On the extensions page there is an option to 'Create Default Pins.' By clicking on this button, the
extension numbers are duplicated across to the PIN field. If required, the numbers can be changed
by over typing them. The same idea applies to users. Click the 'Create Default Users' button to
populate the users column. The user names that are generated can be edited if required. The user
role can be changed by selecting one of the options in the drop down menu in the user type column.
An Administrator user name and password have to be entered when setting up users in the Config
Import Tool. Click the disk icon in the Config Import Tool to send the configuration into MyCalls. After
import users using you will have to create organisation groups as required and move the newly
imported users in to the appropriate groups.
64 | P a g e