NEC Univerge SV9100 Installation Manual page 48

Enter the name of PC that is acting as the call control server. This is normally the same PC as the
MyCalls server and is running the 3
when a complete installation of MyCalls is carried out. If the TAPI driver is installed on a different PC
to the MyCalls server then the call control service should be installed onto that PC running TAPI.
Instructions on how install the call control service onto a different PC are provided later on in this
manual. Other configurable items are as follows:

Outside Line Access Code - The outside line access code is the number used to seize a trunk
on the PBX

Number of internal call digits – The number of digits of extensions on the PBX. If MyCalls
dials a number of over this number of digits then the number entered in 'Outside line access
code' is added to the dialled number.

Auto Hang-up Calls – If this option is enabled, when a call has finished on the PBX, the phone
will return to an idle state.

Always dial these numbers externally – Any number entered here will always have the
'Outside line access code' added when they are dialled.
Click OK the save the changes
rd
Party TAPI driver. The call control service is installed by default
48 | P a g e