Configuring The Machine For Scanning To Ftp Server - Canon MF419x User Manual

Configuring the Machine for Scanning to FTP Server

Before configuring the machine for scanning to FTP Server, check the setup flow shown below.
Network
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN (P. 419)
Connecting to a Wired LAN(P. 418)
Make sure that you have the following information:
● The IP address of the machine.
● FTP server name.
● Path to the FTP server and folder name.
● User name, password (only if set).
● If the path, folder name, user name, password, etc. for the FTP server are
unknown,contact you Network Administrator.
● To change the FTP port number
Check whether you need to use PASV mode.
● If a firewall is installed between the machine and the FTP server, you must set
PASV mode. Configuring FTP PASV mode(P. 481)
● Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication(P. 567)
Disabling Remote UI(P. 568)
Register the FTP server address.
Book from Remote UI(P. 624)
480
Viewing Network Settings(P. 445)
Changing Port Numbers(P. 549)
Registering Destinations in the Address
0UWX-084