Restrict Sequential Broadcast; Incoming Ring - Canon MF419x User Manual

Restrict Sequential Broadcast

Select whether to prohibit sequential broadcasting, a feature that sends faxes to multiple destinations in
succession. Prohibiting Sequential Broadcasting (MF419x / MF416dw)(P. 563)
Off
Confirm Sequential Broadcast
Reject Sequential Broadcast
Initialize Default Settings
Select this option to restore the default fax transmission settings.
<Menu>
RX Function Settings
Specify settings for receiving faxes.
ECM RX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on sent faxes, see
Off
On
<Menu>
● ECM must be enabled on both the machine and the other fax device because error check is
performed on both the sending and receiving devices.
● Even when ECM is enabled, errors may occur due to telephone line conditions.
● It may take a longer time than usual to process data when ECM is enabled because the error check
and corrections are performed while the data is transmitted.

Incoming Ring

Specify settings for sounding a ring to notify you of incoming faxes. This feature is only available when <Auto>
or <Fax/Tel Auto Switch> is selected for the receive mode. Specify how many times the incoming call rings when
the machine receives a fax call. You can also disable the settings to prevent the incoming call from ringing.
Off
On
1 to 2 to 99 (times)
Setting Menu List
<Fax Settings> <TX Function Settings>
ECM TX(P. 658) .
<Fax Settings> <RX Function Settings>
*1
<Initialize Default Settings>
<ECM RX>
661
<Yes>
<On>