Configuring Ethernet Settings - Canon MF419x User Manual

Configuring Ethernet Settings

1
Tap <Menu> in the Home screen.
2
Tap <Network Settings>.
● If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 44)
3
Select <Ethernet Driver Settings>
4
Select whether to configure Ethernet settings automatically or manually.
Configuring Ethernet settings automatically
Tap <On>. The machine detects and automatically sets the communication mode and the Ethernet type that
can be used.
Configuring Ethernet settings manually
1
Tap <Off>.
2
Select the communication mode.
● Tap <Communication Mode>
<Half Duplex>
Network
Ethernet is a standard for communicating data in a local area network (LAN). You can
set the communication mode (half-duplex/full-duplex) and the Ethernet type (10BASE-
T/100BASE-TX/1000BASE-T). In general, the machine can be used without changing the
defaults ( Ethernet Driver Settings(P. 639) ), but you can change these settings to
suit your network environment.
<Auto Detect>.
tap <Half Duplex> or <Full Duplex>.
484
0UWX-087
.