Product Overview
5
4
3
2
1
11
1. Height-of-cut deck lift
pedal
2. Transport lock
3. Parking brake lever
4. Controls
5. Motion control levers
6. Roll bar
6
7
8
9
10
G020562
Figure 4
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
11. Z Stand
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 4 and Figure 5).
2
1
6
1. PTO Switch
2. Choke
3. Throttle control
Blade Control Switch (PTO)
Use the blade control switch (PTO) to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades, push
the blade control switch (PTO) down or move a motion
control lever into the neutral lock position.
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
Throttle Control
The throttle control is variable between Fast and Slow.
Battery Indicator Light
When the ignition key is initially turned to the Run position
for a few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned on
and when the charge is below the correct operating level
(Figure 6).
13
3
4
Figure 5
4. Hour meter/Safety
interlock display/Fuel
guage
5. Ignition switch
6. Fuses
5
G008951