Toro 25500 Operator's Manual page 30

Accessing the Main-Selection Screen
To access the main-selection screen, press and release the up
arrow and the down arrow buttons
time. This screen allows the user to choose from the function
screens shown in Figure 36.
Figure 36
1. Engine information
2. Trencher (traction unit)
setup
3. Screen setup
4. Trencher (traction unit and
attachments) diagnostics
Accessing the Engine Information Screen
To access the engine-information screen, press button
number 1 on the main-selection screen; refer to
Main-Selection Screen (page
This screen displays measurements for the following
engine-operating parameters:
•
Engine speed in rpm
•
Engine load percentage
•
Engine hours (Figure
•
Oil pressure and boost pressure
•
Engine coolant and intake temperature
•
Voltage (Figure 37)
•
Amount of fuel used
(Figure 36) at the same
5. Trencher (traction unit)
errors
6. Engine errors
7. Propel (ground speed)
limits
Accessing the
30).
(Figure 37)
(Figure 37)
37)
(Figure 37)
(Figure
(Figure 37)
1. Return to the previous screen
Accessing the Trencher Setup Function Screen
Note: You need the PIN to access this screen; to obtain the
PIN, contact an Authorized Toro Distributor.
Use the trencher setup screen to access calibration settings
for the following functions:
•
Foot pedal for traction control
•
Advanced-steering control (optional accessory)
•
Automatic-tilt chassis (optional accessory)
Accessing the Screen Setup Function Screen
To access the screen setup function, press button number
3 on the main-selection screen; refer to
Main-Selection Screen (page
This screen allows the user to increase or decrease the
brightness of the monitor by pressing the following:
•
Button 5—Increase the display brightness
•
Button 6—Decrease the display brightness
37)
30
Figure 37
Accessing the
30).
(Figure
(Figure
38)
38)