Toro 30605 Operator's Manual page 20

Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Engine Run
Glowplugs
Fan
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Auto Idle
Mow Speed
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine, and
fan have been on, as well as
the number of hours that the
machine has been transported
and overheated
Lists the number of preheats
and starts the machine has
experienced
Description
Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Engine
Run menu and the information
contained there.
Indicates if the following items
are active: Key start, timeout
limited, and glowplugs
Indicates if the fan is active
in the following instances:
Engine high temp, oil high
temp, engine or hydraulic high
temp, and fan on
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric
Controls the language used
on the InfoCenter*
Controls the brightness of the
LCD display
Controls the contrast of the
LCD display
Allows the distributor/engineer
to access protected menus by
inputting a passcode
Controls the time that before
idling the engine when the
machine not in use
Controls the maximum speed
while in mow (low range)
Trans Speed
Smart Power
* Only operator-faced text is translated. Faults, Service, and
Diagnostics screens are service-faced. Titles will be in the
selected language, but menu items are in English.
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are 4 operating configuration settings that are adjustable
within the Settings Menu of the InfoCenter: auto-idle time
delay, maximum mowing ground speed, maximum transport
ground speed, and Smart Power. These settings are in the
Protected Menu.
Accessing the Protected Menu Settings
To access the Protected Menu Settings:
•
From the M Menu, scroll down to the S
AIN
Menu and press the right button.
•
In the S Menu, scroll down to the P
ETTINGS
Menu and press the right button.
•
Enter the passcode by using the center button to set the
1st digit, then press the right button to move on to the
next digit.
•
Use the center button to set the 2nd digit, then press the
right button to move on to the next digit.
•
Use the center button to set the 3rd digit, then press the
right button to move on to the next digit.
•
Use the center button to set the 4th digit, then press the
right button.
•
Press the middle button to enter the code.
You can change the ability to view and change the settings
in the P Menu. Once you have accessed the
ROTECTED
P Menu, scroll down to P
ROTECTED
the right button, changing P
you to view and change the settings in the P
without entering the passcode. Changing P
20
Controls the maximum speed
while in transport (high range)
Smart Power prevents
bogging down in heavy turf by
automatically controlling the
machine speed and optimizing
the cutting performance
Description
Lists the model number of the
machine
Lists the serial number of the
machine
Lists the software revision of
the master controller
Lists the software revision of
the InfoCenter
Lists the machine
communication bus status
ETTINGS
ROTECTED
Settings. Using
ROTECT
Settings to Off allows
ROTECT
ROTECTED
Settings
ROTECT
Menu