Wall Mounting The Base On A Switch Box - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
5 - 48
4.10.1.4

Wall Mounting the Base on a Switch Box

1.
2.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Locate the screw holes on the base and hang the
cover over the screws on the switch box as
illustrated in Figure 5-50 Wall Mounting Base on
Switch Box.
Figure 5-50 Wall Mounting Base on Switch Box
Hang the Multiline Terminal on the base.
Figure 5-51 Wall Mounted Multiline Terminal
Because of strength variation in switch boxes, this
.
method is not recommended.
UNIVERGE SV8100