Issue 5.0
6 - 44
PSTN
Figure 6-35 PSA-L UNIT Connections
11.5.1
Installing the PSA-L Adapter
Before installing or removing the PSA-L
adapter, remove the line cord, LAN cable, and
then AC adapter from the outlet.
1.
Turn multiline terminal upside down.
2.
Unplug the line cord and handset cord from the keyset.
Only one PSA-L UNIT can be attached to the DTL/ITL multiline
.
terminal.
3.
Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg Support on page
UNIVERGE SV8100
DTMF/DP
Figure 6-36
6-45).
Installing SV8100 Optional Equipment