UNIVERGE SV8100
System Hardware Manual
3.
Pry the side panel from the multiline terminal.
Side Panel
Figure 5-53 Remove Side Panel from Multiline Terminal
4.
Return the multiline terminal to the buttons side up
position.
5.
Fit the projections on the side of the 8LK-L UNIT
into the guide holes on the side of the multiline
terminal.
6.
Secure the 8LK-L UNIT with the two screws
provided.
Figure 5-54 Securing the 8LK-L UNIT with Screws
7.
Turn the multiline terminal upside down.
Issue 5.0
5 - 51