Hour Meter; Oil Pressure Warning Light; Ignition Switch; Fuel Gauge - Toro 07360 Operator's Manual

Liquid cooled gas utility vehicle
Hide thumbs Also See for 07360:
Table of Contents

Advertisement

Hour Meter

Indicates the total hours of machine operation. The hour
meter (Fig. 24) starts to function whenever the key switch
is rotated to "ON" position or if engine is running.

Ignition Switch

The ignition switch (Fig. 24), used to start and stop the
engine, has three positions: OFF, RUN and START. Rotate
key clockwise — START position — to engage starter
motor. Release key when engine starts. The key will move
automatically to the ON position. To shut engine off, rotate
key counterclockwise to OFF position.
Figure 24
1. Charge indicator
2. Coolant temperature
gauge & light
3rd High Lockout Switch
Moving switch (Fig. 24) to slow–
removing key will prevent use of third gear when in the
High range. Engine will shut off if shift lever is moved to
third gear when in High range. Key is installed with teeth
pointing downward. Push key in to turn. Key is removable
in either position.

Light Switch

Toggle switch (Fig. 25) to activate headlights. Push to turn
lights "ON".
1 2
1
1
1 3
4
5
3. Hour meter
4. Ignition switch
5. 3rd high lockout switch
– position and
26

Oil Pressure Warning Light

Light glows (Fig. 25) if engine oil pressure drops below a
safe level while engine is running. If light flickers or
remains ON, stop vehicle, turn off engine and check oil
level. If oil level was low, but adding oil does not cause
light to go out when engine is restarted, turn engine off
immediately and contact your local TORO distributor for
assistance.
To check operation of warning lights:
1. Apply parking brake.
2. Turn ignition key to "ON", but do not start engine. The
oil pressure light should glow. If light does not function,
either a bulb is burned out or there is a malfunction in
the system which must be repaired.
Note: If engine was just turned off, it may take 1 to 2
minutes for light to come on.

Fuel Gauge

Shows amount of fuel in tank. Operates only when ignition
switch is in "ON" position (Fig. 25).
3
2
1
Figure 25
1. Light switch
2. Oil pressure warning light
3. Fuel gauge
Tachometer
Optional (Fig. 25).

Horn Button

Pressing button activates horn (Fig. 25).
4
5
4. Tachometer (Optional)
5. Horn

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0736107361tc07365Workman 42003200

Table of Contents