D-Link DWC-2000 Cli Reference Manual page 24

setup
23 show net radvd
24 show net radvd setup
25 show net routing dynamic
26 show net routing dynamic setup
27 show net routing
28 show net routing static
29 show net routing static ipv4
show net routing static ipv4
30
setup
31 show net routing static ipv6
show net routing static ipv6
32
setup
33 show net captivePortal
show net captivePortal
34
billing_profile <row_id>
show net captivePortal
35
all_billing_profile
36 show net vlan
37 show net vlan configuration
38 show net multivlan
39 show net multivlan subnet
show net multivlan subnet
40
status
41 show net port-vlan
42 show net port-vlan status
The command "wlan ?" at the CLI prompt, gives a description of all the
configuration commands in the branch wlan , these are as follows:
1 wlan ap_management
2 wlan ap_management manual
3 wlan ap_management ap_database
wlan ap_management
4
rf_management
configuration.
.
Display RADVD
configuration.
Show dynamic routing
setup.
Show dynamic routing
Setup.
Displays routing setup.
.
.
Show all the configured
IPV4 routes.
.
Show all the configured
IPV6 routes.
show vlan server status.
show vlan server status.
Display vlan server
status.
show Port vlan status.
Display Port vlan status.
AP Management.
Request
administrative
commands/actions
for managed
access points.
Enter AP Database
configuration mode.
Configure power
plan and channel
22