Wlan Ap_Profile Qos Configure <Profileid> <Radio - D-Link DWC-2000 Cli Reference Manual

4 cancel
5 mode
6 enable
7 state_isolation
8 rts_threshold
9 enable_load_balancing
10 load_utilization
11 maximum_clients
12 rf_scan_otherchannels Enable/Disable scan of other channels.
13 rf_scan_sentry
14 dtm_period
15 beacon_interval
16 automatic_channel
17 automatic_power
18 initial_power
19 rate
20 rate basic
21 rate supported
22 channel_auto_eligble
2.17 wlan ap_profile QoS configure <profileid> <radio>
S.No Command Name
current mode.
Roll back AP profile radio settings
changes.
Configure the physical mode for the
radio interface.
Enable/Disable the radio operational
mode.
Enable/Disable Station Isolation.
Configure the RTS threshold.
Enable load balancing parameters for
the radio.
Configure the percentage utilization.
Configure the maximum number of
simultaneous client associations
allowed.
Set the scan mode to sentry.
Configure the DTIM period.
Configure the beacon interval.
Enable/Disable the Automatic Power
Save Delivery mode for the radio.
Enable/Disable auto power adjustment.
Configure a default power setting for
the radio.
Configure data rates for the radio.
Configure basic client rates.
Configure supported client rates.
Enable/Disable channel auto-eligibility
for client connections.
Description
42
Boolean choice
Boolean choice
Unsigned integer
Boolean choice
Range of power
percentage
Unsigned integer
Boolean choice
Boolean choice
Unsigned integer
Unsigned integer
Boolean choice
Boolean choice
Range of power
percentage
Unsigned integer
Unsigned integer
Unsigned integer
Type and