Wlan Peer_Controller Configure; Wlan Peer_Controller Push_Configuration <Ipaddr - D-Link DWC-2000 Cli Reference Manual

1 <macaddr>

2.26 wlan peer_controller configure

S.No Command Name
1 save
2 cancel
3 exit
4 enable_global
5 enable_discovery
6 enable_channel/power
7 enable_ap_database
8 enable_device_location
9 enable_ap_profile
10 enable_known_client
11 enable_captive_portal
12 enable_radius_client
13 enable_QoS_acl
14 enable_QoS_diffserv
15 enable_wds_group
2.27 wlan peer_controller push_configuration <ipaddr>
Command
S.No
Name
1 <ipaddr>
wlan client
configuration mode.
Description
Save peer controller configuration
changes.
Roll back peer controller configuration
changes.
Save peer controller configuration
changes and current mode.
Enable/Disable global configuration push
to peer controllers.
Enable/Disable discovery configuration
push to peer controllers.
Enable/Disable channel and power
configuration push to peer controllers.
Enable/Disable AP database
configuration push to peer controllers.
Enable/Disable device location
configuration push to peer controllers.
Enable/Disable AP profile and network
configuration push to peer controllers.
Enable/Disable known client
configuration push to peer controllers.
Enable/Disable Captive Portal
configuration push to peer controllers.
Enable/Disable RADIUS client
configuration push to peer controllers.
Enable/Disable QoS ACL configuration
push to peer controllers.
Enable/Disable QoS DiffServ
configuration push to peer controllers.
Enable/Disable wds group configuration
push to peer controllers.
Description
Start the configuration push
for one peer controllers.
MAC address AA:BB:CC:DD:EE:FF where
each part is in the range 00-FF
Type and Description
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
48
Type and
Description
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice