Wlan Ap_Management Ap_Database Add <Macaddr; Wlan Ap_Management Ap_Database Edit <Macaddr - D-Link DWC-2000 Cli Reference Manual

8 debug
9 debug passwd
debug
10
passwd_confirm
debug
11
enable_debug
12 reset
2.2 wlan ap_management ap_database add <macaddr>
S.No Command Name Description
<macaddr>
1
2 save
3 cancel
4 exit
5 mode
6 location
7 password
8 profileid <1-16>
9 ssid
10 channel
11 wds_mode
12 security_mode
13 wired-mode
Enable/Disable debugging
on Managed AP.
Enter the admin password
for the AP (the default is
admin.
Enter the admin password
again.
Enable/Disable debugging
on Managed AP.
Reset a WS managed AP.
wlan ap-management ap-
database configuration
mode.
Save ap-database
configuration changes.
Roll back ap-database
configuration changes.
Save ap-database
configuration changes and
current mode.
Configure the AP Managed
mode.
Configure the AP location
description.
Configure the AP
Authentication Password.
Set the AP Profile ID to use
for configuration.
Configure the stand-alone
AP expected SSID.
Configure the stand-alone
AP expected channel.
Configure the stand-alone
AP expected WDS mode.
Configure the stand-alone
AP expected security
mode.
Configure the stand-alone
String
String
Boolean choice
Boolean choice
Type and Description
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-
FF
AP mode
String
String
AP Profile ID
String
Unsigned integer
Stand-alone AP expected WDS
mode
Stand Alone AP Security mode
36