D-Link DWC-2000 Cli Reference Manual page 32

avail_interfaces
10 util system_check capturePackets stop
util system_check capturePackets
11
download <fileName> <ipAddr>
12 util reboot
13 util schedule-reboot <enable_reboot>
14 util usb_test <ipAddr> <fileName>
util
15
backup_configuration <fileName> <ipAddr>
util
16
restore_configuration <IpAddr> <FileName>
util
17
firmware_upgrade <IpAddr> <FileName>
The command "qos ?" at the CLI prompt, gives a description of all the
configuration commands in the branch qos , these are as follows:
1 qos lan
2 qos lan trustmode
3 qos lan trustmode cos
4 qos lan trustmode dscp
5 qos lan cos-to-dscp-remarking
6 qos lan queue
available
interfaces for
packet
capture.
Stop the
packet
capture.
Download the
packet
capture to the
host machine.
Reboot the
system.
Reboot the
system.
To test the
USB.
Download the
backup
configuration
file to the host
machine.
To restore the
configuraton.
To upgrade
the firmware.
Configure qos
parameters for
lan.
Trustmode
configuration in
the controller.
Configure cos
based QoS on
lan.
Configure dscp
based QoS on
lan.
Enable cos-to-
dscp-remarking.
Queue
30