D-Link AC3200 Ultra User Manual page 110

Section 4 - Configuration - Access Point Mode
Channel Width Select Auto 20/40/80 MHz if you are using 802.11ac, 802.11n, and
(5 GHz):
802.11a devices, select Auto 20/40 MHz if you are using 802.11n
and 802.11a devices, or select 20 MHz if you are only using 802.11a
devices.
HT20/40 Enable or disable HT20/40 Coexistence.
Coexistence:
(2.4 GHz):
The default setting is Visible. Select Invisible if you do not want to
Visibility Status:
broadcast the SSID of your wireless network. Making your network
invisible is not a form of security alone.
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 88 for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.
WPS-PBC Status: Enable or disable WPS-PBC fuctionality.
WPS-PIN Status: Enable or disable WPS-PIN functionality.
Click Save when you are done.
D-Link DIR-890L User Manual
Secondary 5GHz
Status: Enabled
Wi-Fi Name (SSID): Your_2nd_5G_Wi-Fi_Network
Password: A_Str0nG_P@ssW0rd!%!
Security Mode: WPA/WPA2-Personal
802.11 Mode: Mixed 802.11a/n/ac
Wi-Fi Channel: Auto
Transmission Power: High
Channel Width: Auto 20/40/80 MHz
Visibility Status: Visible
Schedule: Always Enable
Wi-Fi Protected Setup
Enabled
WPS-PBC Status:
WPS-PIN Status: Locked
Advanced Settings ...
⌵
⌵
⌵
⌵
⌵
⌵
⌵
105