D-Link AC3200 Ultra User Manual page 71

Section 4 - Configuration - Router Mode
HT20/40 Enable or disable HT20/40 Coexistence.
Coexistence:
(2.4 GHz):
Visibility Status: The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 88 for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
WPS-PBC Status: Enable or disable WPS-PBC fuctionality.
WPS-PIN Status: Enable or disable WPS-PIN functionality.
Click Save when you are done.
D-Link DIR-890L User Manual
Secondary 5GHz
Status: Enabled
Wi-Fi Name (SSID): Your_2nd_5G_Wi-Fi_Network
Password: A_Str0nG_P@ssW0rd!%!
Security Mode: WPA/WPA2-Personal
802.11 Mode: Mixed 802.11a/n/ac
Wi-Fi Channel: Auto
Transmission Power: High
Channel Width: Auto 20/40/80 MHz
Visibility Status: Visible
Schedule: Always Enable
Wi-Fi Protected Setup
Enabled
WPS-PBC Status:
WPS-PIN Status: Locked
Advanced Settings ...
⌵
⌵
⌵
⌵
⌵
⌵
⌵
66