D-Link AC3200 Ultra User Manual page 47

Section 4 - Configuration - Router Mode
Dynamic IP
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Static IP
L2TP IP Address: Enter the IP address provided by your ISP.
L2TP Subnet Enter the subnet mask provided by your ISP.
Mask:
L2TP Gateway IP Enter the gateway IP address provided by your ISP.
Address:
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Click Save when you are done.
D-Link DIR-890L User Manual
L2TP (continued)
⌵
Address Mode: Dynamic IP
Primary DNS Server:
Secondary DNS Server:
⌵
MTU: Auto
COPYRIGHT © 2016 D-Link
⌵
Address Mode: Static IP
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
⌵
MTU: Auto
COPYRIGHT © 2016 D-Link
42