Local Connectivity Only - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
Local Connectivity Only allows you to set up a local IPv6 connection that does not connect
to the Internet.
Advanced Settings
IPv6 ULA Settings
Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses (ULA)
settings.
If you selected Enable ULA and Disabled Default ULA Prefix:
ULA Prefix: Enter your own ULA prefix.
Current IPv6 ULA Settings
Current ULA Displays the current ULA prefix.
Prefix:
LAN IPv6 ULA:
Displays the LAN's IPv6 ULA.
Click Save when you are done.
D-Link DIR-890L User Manual

Local Connectivity Only

IPv6 ULA SETTINGS
Home Settings
DIR-890L HW:A1 FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Settings >> Internet >> IPv6
My Internet Connection is: Local Connectivity Only
IPv6 ULA SETTINGS
Enable ULA: Enabled
Use Default ULA Prefix: Enabled
Enable ULA: Enabled
Disabled
Use Default ULA Prefix:
ULA Prefix:
CURRENT IPv6 ULA SETTINGS
Current ULA Prefix: Not Available
LAN IPv6 ULA: Not Available
Features Management
IPv4 Save
⌵
Advanced Settings ...
/64
63