Section 3 - Installation - Router
4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.
5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.
6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow 1
minute for the router to boot up.
Note: This unit is to be used with power supply model DA-60N12.
D-Link DIR-890L User Manual
Hardware Setup (continued)
DIR-890L
DIR-890L
DIR-890L
Modem
Modem
Modem
15