D-Link AC3200 Ultra User Manual page 56

Section 4 - Configuration - Router Mode
Select Auto Configuration if your ISP assigns your IPv6 address when your router requests
one from the ISP's server. Some ISPs require you to adjust settings on your side before your
router can connect to the IPv6 Internet.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Address Settings
Enable DHCP-PD:
Enable or disable prefix delegation services.
LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-890L User Manual
Auto Configuration (SLAAC/DHCPv6)
Home Settings
DIR-890L HW:A1 FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Settings >> Internet >> IPv6
My Internet Connection is: Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS SETTINGS
DNS Type: Obtain a DNS server address automatically
IPv6 DNS SETTINGS
DNS Type: Use the following DNS address
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 ADDRESS SETTINGS
Enable DHCP-PD: Enabled
LAN IPv6 Link-Local Address: Not Available
LAN IPv6 ADDRESS SETTINGS
Use Link-Local Address: Disabled
Enable DHCP-PD:
LAN IPv6 Link-Local Address: Not Available
Features Management
Save
IPv4
⌵
⌵
⌵
Advanced Settings ...
/64
Advanced Settings ...
51