Panasonic SJ-MR100 Operating Instructions Manual page 54

1
2
: 9
ENTER
1
2
3
54
EDIT
:
ENTER
MARK MODE
EDIT
MARK MODE
1
a
b
EDIT
MARK MODE
ENGLISH
Editing MDs
COMBINE
(Combining 2 tracks)
Remove a track mark from between two
tracks, effectively making them one track.
9
(If you combine tracks 2 and 3, for example,
the track will take the number 2 and also re-
tain the title for track 2.)
1
Press [EDIT, MARK MODE] while
playing the latter of the two
tracks you want to combine (or
while paused).
2
1 Turn the jog dial to select
"COMBINE?".
2 Press it.
a track before
b track playing
The display asks you to confirm your se-
lection. In the example, the last eight
seconds of track 2 and the first eight sec-
onds of track 3 play repeatedly.
3
Press [EDIT, MARK MODE].
When "UTOC Writing" goes out editing is
complete and the unit stops.
To stop part way through an editing
operation
Press [∫, POWER OFF] before confirming
the operation in step 3.
∫ When
stopped
1
Press [EDIT, MARK MODE] while
the disc is stopped.
2
1 Turn the jog dial to select
"COMBINE?".
2 Press the jog dial.
Now the display is in the mode to select
the tracks to be combined.
3
1 Turn the jog dial to select the
two tracks to combine.
2 Press the jog dial.
4
Press [EDIT, MARK MODE].
When "UTOC Writing" goes out editing is
complete and the unit stops.
Note.
≥COMBINE does not work while playing
track 1.
≥You cannot combine a track recorded nor-
mally and a track recorded monaurally.
performed while