NEC Express5800/GT110d-S (2C/i3-2120) EXP281A User Manual page 110

Chapter 2 Preparations
(2) Connecting 3.5-inch devices
You can mount SCSI devices, SAS devices, and USB devices (for internal connections) to 3.5-inch devices.
(a) If mounting an SCSI device
Use SCSI cable K410-181(00) with an SCSI controller to connect the SCSI device. Set an SCSI ID that is
not already set as the ID for another SCSI device. Because a connector for terminating SCSI connections
is installed in SCSI cable K410-181(00), specify the termination settings of the 3.5-inch device to Disabled.
(b) If mounting an internal USB device
Use the dedicated internal USB cable K410-255(00).
110
Power
supply
unit
Motherboard
SCSI controller
Terminal
SCSI cable (K410-181(00))
Power
supply
unit
Motherboard
Internal USB
connector
USB cable (K410-255(00))
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
Optical disk drive
SCSI device
SATA cable (for use with the optical disk drive)
Optical disk drive
SCSI device
SATA cable (for use with the optical disk drive)