Table of Contents
Advertisement
Chapter 2 Preparations
1.10.3 Installation
Install a PCI card to connect to a PCI slot by using the following procedure.
1.
Before installation, make sure the switch or jumper settings on the card are properly set according to
the instruction manual supplied with the card if necessary.
2.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
3.
Remove the side cover while referring to Chapter 2 (1.4 Removing the Side Cover).
4.
Open the PCI slot retention.
5.
Remove the expansion slot cover aligned with the
slot where you are going to install a card.
84
Important
Keep the removed slot cover for future use.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
