Philips SOPHO SuperVisor 25 Engineer's Manual page 40

Make your choice: [5]
In the following the choices are explained:
Choice 1 (Retrieve data from SuperVisor)
If you have chosen '1' it means that you want to retrieve data from the Supervisor. The
following menu is displayed.
Data retrieval from SuperVisor
1 - Retrieval of directory data
2 - Retrieval of status monitoring data
3 - Retrieval of speed dialling key data
4 - Return to main menu
Make your choice: [1]
Give file name: [tele.txt]
Retrieval in progress...
After you have made your choice, you must enter the file name (or no characters if you want
to select the default file name) and close with <CR>.
CAUTION:
After you have given the file name the retrieval is started.
When the retrieve action is completed, the tool redisplays the menu.
Choice 2 (Edit data)
In this option you can edit a data file which is on your hard disk. This can be a new file or the
file you have retrieved from the console. After editing you can (re)store the file into the
console with option 3 in the main menu.
Note: The editor uses an edit program and the file which has to be edited, as defined in option 4
of the main menu. First run option 4 to be sure that the correct ASCII edit program is used,
and that the correct directory file is selected.
38
IF YOU ENTER A FILE NAME OF AN ALREADY EXISTING FILE, THE
CONTENTS OF THIS FILE WILL BE OVERWRITTEN BY THE
RETRIEVED DATA!!