Facilities - Philips SOPHO SuperVisor 25 Engineer's Manual

WARNING: DO NOT CONNECT MORE THAN TWO SV25/35 PER BOARD IN
SYSTEM TYPE
TBX
SOPHO-S50/100
SOPHO-S250/1000 (PR63x and 64x
only)
SOPHO-S250/1000 (SSW 300 and SSW
805 only)
SOPHO iS3070 with PM2500
SOPHO iS3000 series
Table 1-1 Overview of SOPHO SuperVisors in relation to ISPBX System Types.
The S bus interface protocol is 1TR6 (+proprietary elements) with TMP protocol.
0
The consoles provide all the basic call handling facilities of an operator desk. In addition to this,
features and facilities are provided to improve the operator and system administrator
efficiency. The system administrator can be e.g a communications manager or operator
supervisor.
Each user is able to switch the SOPHO SuperVisor to night condition by pressing a certain key.
The system is switched to the night condition when all the operators are switched to the night
condition. Switching the console to day condition can be password protected.
1.2.

FACILITIES

Model 35 offers a great number of facilities. Depending on the System Software in the ISPBX,
the SuperVisor facilities can be fully used, or used with a limited capacity/functionality.
4
THE IS3000 (NOT RELEVANT FOR MODEL 25-A)
DO NOT USE THE REMAINING CIRCUITS OF THE BOARD FOR
CSTA INTERFACES, TRUNK LINES OR ACD AGENTS; USE THOSE
CIRCUITS FOR NORMAL ISDN EXTENSIONS ONLY.
DO NOT CONNECT MORE THAN TWO SV25/35 PER PM IN THE
IS3000.
SYSTEM INTERFACE
MODEL 25-A
MSU
ADU
UMI
AOC
OIU
AOC
SYSTEM INTERFACE
MODEL 25-S0/35
DTX-I
DLC-C/D/U with PNT1
DTX-I
DLC-C/D/U with PNT1
DOC with PNT1