Wall Mounted Installations - Motorola AP 7161 Installation Manual

AP 7161 Access Point Installation Guide
Examples for using the extension arm alone, or with the mounting bracket kit for a pole mount installation are
shown below:

Wall Mounted Installations

For wall mounted installations, use only the access point bracket and angle adjust bracket sections.
CAUTION
NOTE
NOTE
With the open slot connections facing down, attach the angle adjust bracket section at the desired mounting
1.
location using four #10/32 lag bolts.
Always mount the AP 7161 with the black gore vent facing down.
The U-bolt and band clamps are not included in the mounting bracket kit.
The lag bolts are not included in the mounting bracket kit.
29