Options
8.10 K50, Sensor Module Cabinet-Mounted SMC30
NOTICE
The KTY temperature sensor must be connected with the correct polarity.
Risk of electric shock!
Only temperature sensors that meet the safety isolation specifications contained in
EN 61800-5-1 may be connected to terminals "+Temp" and "-Temp".
If these instructions are not complied with, there is a risk of electric shock!
8.10.4
Connection example
Connection example 1: HTL encoder, bipolar, without zero mark -> p0405 = 9 (hex)
Figure 8-16
Note
Alternatively, a temperature measurement function is also available on customer terminal
block -X55.
358
DANGER
Connection example 1: HTL encoder, bipolar, without zero mark
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A