[433] DID / TIE Subscriber Number Removed Digit
Description
Assigns the removed digits of received a DID and TIE subscriber number for each DID / TIE
format. In this case, digits are removed from the beginning of the received digits.
Selection
• DID / TIE format number: 1 through 8
• Number of digits to be deleted (RMV): 0 through 6 (0=no deletion)
Default
All DID / TIE formats – RMV:0
Programming
1.
Enter 433.
Display: 433 REMOVE DIAL
2.
Press NEXT.
Display: Format NO?
3.
Enter a DID / TIE format number.
To enter DID / TIE format number 1, you can also press NEXT.
Display example: 1:0
4.
Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another DID / TIE format, press NEXT or PREV, or SELECT and the
desired DID / TIE format number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You cannot leave the entry empty.
• You must confirm with your central office regarding the number of digits being sent.
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
General Programming
2.5 Outside Line Programming
203