[135] DID Number Conversion Selection
Description
Selects whether the Direct Inward Dialling (DID) number is allocated as an extension number
or is converted using the Transfer Table.
Selection
EXT Number / Transfer Table
Default
EXT Number
Programming
1.
Enter 135.
Display: 135 DID SELECT
2.
Press NEXT.
Display: EXT Number
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• The DID number is converted from the DID subscriber number using the programmes
[433] DID / TIE Subscriber Number Removed Digit and [434] DID / TIE Added
Number.
• Programmes [136] through [139] are required to use the Transfer Table.
Features Guide References
Direct Inward Dialling (DID)
General Programming
2.2 System Programming
107