[442] Voice Level (Transmit)
Description
Assigns the transmitted voice level on an outside line port basis. This programme is valid only
when the voice path type is set to "4 wire".
Selection
• Outside line (CO) number:
KX-TD816 – 05 through 08,
KX-TD1232 – 09 through 12 (Master), 21 through 24 (Slave),
( =all outside lines)
• -6 db / -3 db / 0 db / +3 db
Default
All outside lines – -3 db
Programming
1.
Enter 442.
Display: 442 V.LEVEL (TX)
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 09, you can also press NEXT.
Display example: CO09:-3db
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
Press END.
Conditions
To assign all outside lines to one selection, press the
Features Guide References
TIE Line Service
General Programming
2.5 Outside Line Programming
key in step 3.
213