Smdr Output Mode - Panasonic KX-TD816 Programming Manual

[816] SMDR Output Mode

Description
Assigns the SMDR output mode. There are two standards available – Regular and Charge.
Selection
Regular / Charge
Default
Regular
Programming
1.
Enter 816.
Display: 816 SMDR MODE
2.
Press NEXT.
Display example: SMDR:Regular
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• Select the output mode used by your SMDR.
• If you assign for Charge, you can select the display in Meter / in Charge through programme
[143] Charge Display Selection.
• When "Charge" is selected, the assignment in programme [990] System Additional
Information, Area 05 - bit 12, is ignored and "<I> + caller no." is printed out in the SMDR.
Features Guide References
Station Message Detail Recording (SMDR)
General Programming
2.8 Resource Programming
281