Panasonic KX-TD816 Programming Manual page 427

Programme
[314-321] ARS Leading Digit Entry for Plans 1
through 8
[322-329] ARS Routing Plans 1 through 8
[330] ARS Modify Removed Digit
[331] ARS Modify Added Number
[332] Extra Entry Table Selection
[333] TRS Entry Code Assignment for Extra
Table
[334] Emergency Dial Number Set
[340] TIE Line Routing Table
[341] TIE Modify Removed Digit / Added
Number
[400] Outside Line Connection Assignment
[401] Outside Line Group Assignment
[402] Dial Mode Selection
[403] Pulse Speed Selection
[404] DTMF Time
[405] CPC Signal Detection Incoming Set
[406] Caller ID Assignment
Default Values
All locations – Not stored
All time schedules – Not stored
All modification tables – 0
All modification tables – Not stored
Except - 2
All locations – Not stored
All locations – Not stored
All locations – Not stored
All locations – Deleted digit=0; Added
Number=Blank
All outside lines – Connect
(If KX-TD290 or KX-TD188 is connected: All
outside lines in the Slave System – No Connect)
CO01 – TRG 1;
CO02 – TRG 2;
CO03 – TRG 3;
CO04 – TRG 4;
CO05 – TRG 5;
CO06 – TRG 6;
CO07 – TRG 7;
CO08 – TRG 8 (for KX-TD816)
CO08 through CO54 – TRG 8 (for KX-TD1232)
KX-TD816BX, KX-TD1232(D)BX/ML, KX-
TDN1232: All outside lines – Pulse
KX-TD816HK, KX-TD1232HK/X: All outside lines
– DTMF
All outside lines – 10 pps
All outside lines – 80 ms
All outside lines – Disable
All outside lines – Disable
Default
427