6.11.
6.11.1.
84
COM600 series, version 4.1
User's Manual
8. Unselect Intel(R) 82657LM Gigabit Network Connection adapter and select both
Intel(R) PRO/1000 MT Dual Port Server Adapters. Click Next.
9. Select Switch Fault Tolerance to a team mode and click Next.
Figure 6.10-3 Switch Fault Tolerance selection
10. Click Finish to start installation
11. Configure the Team. Click OK to close the Properties dialogs.
The Team is now made. One virtual network adapter (named "Local Area Connection
3") appears into Control Panel > Network connections. Configure the IP address for
this adapter.
For more information about Intel Teaming feature, see Intel documentation.
Configuring Data historian
Preparing COM600 for Data Historian
The following operations must be performed in the COM600 computer as the adminis-
trator user to prepare COM600 for Data Historian feature.
Setting the time zone of RTDB
The time zone of the RTDB is by default GMT and it must be set before taking the Data
Historian feature into use.
To set the time zone:
1. Select Start -> All Programs -> Data Historian -> Change Time Zone.
1MRS756125
Switch_Fault_Tolerance.JPG