76
Replacing the Capacitor Pack
1. Remove the module from the cabinet as described in section "Replacing the Drive
Module".
2. Remove the front cover. Remove the profiled side plate.
3. Disconnect the discharging resistor wires.
4. Undo the red fastening screws.
5. Lift the capacitor pack out.
6. Install the new capacitor pack in reverse order to the above.
2 pcs
4
M6x12 combi screw
Maintenance
5
4
4
4
M6
M10
At the rear side (view from
4
below)
4
4
3
R8 Frame pictured.
3
3
2 pcs in
690 V
units