Materials; Applicable Standards - ABB ACS800 Hardware Manual

90

Materials

Cabinet
Busbars
Package
Disposal

Applicable Standards

• UL 508C
• UL 508A
• NEMA 250 (2003)
• CSA C22.2 No. 14-95
Technical Data
Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately 20
micrometers). Polyester thermosetting powder coating (thickness approximately 80
micrometers) on visible surfaces. Color RAL 7035 light beige semigloss.
Tin-plated copper
Wood. Plastic covering of the package: PE-LD, bands PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are
marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which will be classified as hazardous waste.
They must be removed and handled according to local regulations.
The drive complies with the standards below.
UL Standard for Safety, Power Conversion Equipment, second edition
UL Standard for Industrial Control Panels, first edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
Industrial control equipment