Hitachi IJ UX Service Manual page 98

With respect to the setting
of service personnel
mode, refer to "2.1 setting
of maintenance mode by
service personnel".
[Procedure for function addition using upgrade key for UX-D/E]
(1) Turn off the power and turn on the power with upgrade key installed on EZJ126.
(2) Input a special password for service maintenance mode on Select login user menu.
(3) Select Upgrade screen on the second page of the service maintenance screen.
(4) Upgrade screen is displayed.
Upgrade function setup
Particle use 1 line
2 line
3 line
4 line
5,6 line
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ４
Number of upgrades used
(5) Steps possible for upgrade is up to 2 steps for 1 key, 5 steps for 2 keys and 8 steps
for 3 keys.
(6) Select the items to upgrade then press OK.
Upgrade function setup
Particle use 1 line
2 line
3 line
4 line
5,6 line
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ４
Number of upgrades used
(7) Exit the maintenance screen then cancel the service personnel password by using
password protection.
[Stop ] Warning
f/2
f/1
f/2
f/1.286
f/2
f/1.47
f/3 f/1.786
f/3 f/3
300 300-2000
240 1000
3 8
NOT supported
supported 99
48 8
Upgrade code
:
ＱＳ２０２
[Stop ]
f/2
f/1
f/2
f/1.286
f/2
f/1.47
f/3
f/1.786
f/3
f/3
300 300-2000
240 1000
3 8
NOT supported
supported
99
48
8
Upgrade code
:
ＨＲ２０８
3-18
2015.07.07 12:45
Com
HOME
f/1
f/1
f/1
f/1
f/3
Cancel
OK
Warning Com 2015.07.07 12:45
HOME
f/1
f/1
f/1
f/1
f/3
Cancel
OK