Siemens SINUMERIK 840D SL Operating Manual page 277
Hide thumbs
Also See for SINUMERIK 840D SL:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
8. Drilling/centering
9. Drilling/reaming
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1.
Press the "Drilling" and "Centering" softkeys.
The "Centering" input window opens.
2.
Enter the following technology parameters:
T CENTERING
TOOL10
3.
Enter the following parameters:
Diameter/tip
∅
4.
Press the "Accept" softkey.
1.
Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2.
Enter the following technology parameters:
T DRILL10
3.
Enter the following parameters:
Diameter/tip
Z1
DT
4.
Press the "Accept" softkey.
Creating a ShopMill program
7.17 Example, standard machining
D1
F 1000 mm/min
Diameter
5
D1
F 500 mm/min
Tip
-25abs
0
S 12000 rev/min
S 1600 rev/min
277
Advertisement
Table of Contents
