Viewing Pdf Documents - Siemens SINUMERIK 840D SL Operating Manual

...
14.12

Viewing PDF documents

You can display HTML documents as well as PDFs on all drives of the program manager
(e.g. in the local drive or USB) and via the data tree of the system data.
Note
A preview of the documents is only possible for PDFs.
Procedure
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
3. Press the ">>" and "Properties" softkeys.
The "Properties from ..." window appears.
4. Enter any necessary changes.
Note: You can save changes via the user interface in the NC memory.
5. Press the "OK" softkey to save the changes.
1. In the "Program manager" operating area, select the desired storage
medium, i.e. the local or USB drive.
- OR -
Select the desired storage location in the "Commissioning" operating
area in the data tree of the "System data".
2. Position the cursor on the PDF that you want to display and press the
"Open" softkey.
The PDF is shown on the screen.
The storage path of the document is displayed in the status bar. The
current page as well as the total number of pages of the document are
displayed.
3. Press the "Zoom +" or "Zoom -" softkey to enlarge of reduce the size of
the display.
4. Press the "Search" softkey if you want to search for specific texts in the
PDF.
Managing programs
14.12 Viewing PDF documents
595