Parameter
Z
X
K
I
PL
12.6
More complex machining
The following functions are available for comprehensive machining in manual mode:
● Drilling (axial drilling, axial threads, drilling, reaming, deep-drilling, threads)
● Milling (pocket, shank, groove, multi-edged, engraving)
General sequence
For more complex machining processes, proceed in the following order:
● Select the desired function via the corresponding softkey.
● Input the desired values in the parameter screen form.
● Press the "OK" softkey in order to accept the values.
● Press the <CYCLE START> key.
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Description
Target position in the Z direction (abs and inc)
Target position in the X direction (abs and inc)
Center of the circle K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
Center of circle I (inc) - only if circle input via end point and center point
Circle plane
XY IJ
•
YZ JK
•
ZX KI
•
The input screen form closes.
A line with the specified parameters is displayed on the basic screen.
The selected cycle is started.
Note
You can return to the parameter screen form at any time to check and correct the inputs.
Press the "Cursor right" key to jump back to the input screen form.
Working with Manual Machine
12.6 More complex machining
Unit
mm
mm
mm
mm
521