Fujitsu AUYG07LVLA Design & Technical Manual page 326

FUNCTION SETTING
3) Select the [Function No.] by pressing the [Cursor button (Left/Right)], and select the
Function No. to be set by pressing the [Cursor button (Up/Down)].
4) Select the [Setting No.] by pressing the [Cursor button (Left/Right)], and select the Setting
No. to be set by pressing the [Cursor button (Up/Down)].
Pressing the nter button confir
(The data will be transferred to the indoor unit.)
Function setting
R.C. Function
address No.
00 30
Cancel: OK:
Version Error history
When the data was not set up on the indoor
unit "--" is displayed.
Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
Refer to 5-6. FUNCTION DETAILS
the setting.
ERROR
Mo 10:00AM
Setting
No.
- -
When the data was correctly set up on the indoor
unit
(Flashing display changes to illuminated display.)
- (06 - 78) -
Function setting
Mo 10:00AM
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
GOOD
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
00
Mo 10:00AM
01
Mo 10:00AM
01
Mo 10:00AM
01
6. SYSTEM DESIGN