Brother DCP-L5500D Service Manual page 114

 Error code C700
There is insufficient memory to expand PC print data.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
Step
1 Main PCB failure
 Error code C800
The memory size allotted for Secure Print was exceeded when saving Secure Print data.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
Step
1 Main PCB failure
 Error code D100
An error occurred while initializing the modem.
Step
Connection failure of the
1
modem flat cable
2 Modem PCB failure
3 Main PCB failure
 Error code D200
Detected that the modem PCB is not connected.
Step
1 Modem PCB failure
2 Main PCB failure
 Error code D800
An error occurred while initializing the touch panel.
Step
Panel firmware version and
1 main firmware version do not
match
Connection failure of the panel
2
flat cable
3 LCD relay PCB failure
4 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Reconnect the modem flat cable.
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
Cause
Install the latest main firmware.
Reconnect the panel flat cable.
Replace the LCD panel ASSY.
Replace the main PCB ASSY.
2-79
Remedy
Remedy
Remedy
Remedy
Remedy
Confidential