Troubleshooting For Pcb Problems; Main Pcb Failure; Memory Full - Brother DCP-L5500D Service Manual

4.10 Troubleshooting for PCB Problems

4.10.1 Main PCB failure

<User Check>
• Turn the power switch OFF and then ON again.
• Install the latest main firmware.
• Check the print limit ID.
• Check that the print data is not damaged.
Step
1 Main PCB failure

4.10.2 Memory full

<User Check>
• Print the accumulated data.
• Reduce the amount or resolution of the data.
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-114
Remedy
Remedy
Confidential