Table of Contents
Advertisement
(2) Remove the HV insulation sheet.
(3) Release the HVPS flat cable from the securing fixtures.
(4) Remove the two taptite bind B M4x12 screws. Release the two hooks, and remove the
high-voltage power supply PCB ASSY and feed ground spring.
Hooks
Harness routing: Refer to
Taptite bind B M4x12
Fig. 3-109
"13. Bottom side of the machine (High-voltage power supply PCB
ASSY)".
3-109
HVPS flat cable
Feed ground spring
High-voltage power
supply PCB ASSY
Taptite bind B M4x12
HV insulation sheet
Confidential
Advertisement
Table of Contents
Troubleshooting
