Continuous Print Test (Function Code: 67) - Brother DCP-L5500D Service Manual

1.3.20 Continuous print test (function code: 67)

<Function>
This function is used to conduct paper feed and eject tests while printing patterns.
<Operating Procedure>
(1) Press the [6], and then the [7] key in the initial state of maintenance mode. "SELECT: K
100%" is displayed on the LCD.
(2) Refer to the
press the [SET] key. For total pattern printing, proceed to the procedure (8). Otherwise,
"SELECT: A4" is displayed on the LCD.
(3) Refer to the
the [SET] key. "SELECT: PLAIN" is displayed on the LCD.
(4) Refer to the
specification, and press the [SET] key. "SELECT: TRAY1 SX" is displayed on the LCD.
(5) Refer to the
press the [SET] key. "SELECT: 1PAGE" is displayed on the LCD.
(6) Refer to the
and press the [SET] key. For intermittent pattern printing, "SELECT: 1P/JOB" is
displayed on the LCD. For other printings, or move on to the procedure (8).
(7) Refer to the
number of pages for 1 job, and press the [SET] key.
(Only for intermittent pattern printing)
(8) "PAPER FEED TEST" is displayed on the LCD, and printing test pattern starts using the
selected conditions.
(9) When printing is completed, the machine returns to the initial state of maintenance
mode.
<Print pattern> table, press the [▲] or [▼] key to select the print pattern, and
<Paper size> table, press the [▲] or [▼] key to select the paper size, and press
<Print specification> table, press the [▲] or [▼] key to select the media
<Print type> table, press the [▲] or [▼] key to select the print type, and
<Print page> table, press the [▲] or [▼] key to select the pages printing,
<Number of pages per job> table, press the [▲] or [▼] key to select the
5-35
Confidential